Gate Valves

Wedge Gate Valves

Vastas Wedge Gate Valves are API 600 licensed. They are preferred as closure (shut-down) valves. Upon request it can be manufactured in bigger sizes and from various materials. Custom-made wedge gate valves are manufactured to meet the requirements for high-pressure water, sea-water and waster-water systems. SIL 2&3 certified When required it can be manufactured from special material according to NACE corrosion standards and/or temperature class.
Wedge Gate Valves
E500
E50F
Conduit Gate Valves
E50B
E50D
E50P
API 6A Gate Valves
E50A
Cast Steel Wedge Gate Valves - E500

Cast Steel Wedge Gate Valve - E500

Wedge Gate Valves are used as on-off and isolation valves in oil, gas, water, sea-water and steam lines.Custom products are manufactured for high pressure and/or high temperature services. It is important to make the material selection according to the flowing fluid.
Upon request it can be manufactured in bigger sizes and from various materials. Custom-made wedge gate valves are manufactured to meet the requirements for high-pressure water, sea-water and waster-water systems.
SIL 2 & 3 certified. When required it can be manufactured from special material according to NACE corrosion standards and/or temperature class.
Application Area
Pipeline
Pipeline
Storage
Water Works
Power Plant
Functions
ESDV - SOV - BDV - SDV - MOV - MAN - Process Valve Systems

Download Product Catalogue

Vastas Figure
E500
Type
Cast Steel Wedge Gate Valve
NPS
2”-72”
DN
50-1800
Class
150-2500#

Features

Bolted Bonnet
Flexible Wedge
Outside Screwed & Yoke (OSY) Rising Stem (RS)
Fire Safe Design (FSD)
Above Ground (AG) & Under Ground (UG - only full confined packing)
Full Bore (FB)
Anti Static Device (ASD)

Standards

» Design API 600, ISO 10434, ASME B16.34
» Face to Face size ASME B16.10
» End Type ASME B16.5 & B16.47 & ISO 7005 & ASME B16.25
» NACE MR0175
» Fire safe valve design; according to API 6FA and ISO 10497 standards.

Operators

» Manual Operated (Handwheel or Gearbox)
» Motor Operated
» Pneumatic Actuators
» Hydraulic Actuators
Pressure Seal Bonnet Type Wedge Gate Valve - E50F

Pressure Seal Bonnet Type Wedge Gate Valve - E50F

This type is suitable for high temperature and pressure area applications.
It is in conformity with API 600 standards. The bonnet connection is designed as PSB, not BB. It provides positive seal under pressure.
Application Area
Pipeline
Pipeline
Storage
Water Works
Power Plant
Functions
ESDV - SOV - BDV - SDV - MOV - MAN - Process Valve Systems

Download Product Catalogue

Vastas Figure
E50F
Type
Wedge Gate Valve, Pressure Seal Bonnet Type
NPS
3”-16”
DN
80-400
Class
900-2500#

Features

Pressure Seal Bonnet
Flexible Wedge
Outside Screwed & Yoke (OSY) Rising Stem (RS)
Fire Safe Design (FSD)
Above Ground (AG) & Under Ground (UG - only full confined packing)
Full Bore (FB)

Standards

» ASME B16.34, according to API 600
» Face to Face size ASME B16.10
» End Type ASME B16.5 & B16.47 & ASME B16.25
» NACE MR0175, MR0103
» Fire safe valve design; according to API 6FA
and ISO 10497 standards.

Operators

» Manual Operated (Handwheel or Gearbox)
» Motor Operated
» Pneumatic Actuators
» Hydraulic Actuators

Conduit Gate Valves

Vastas Conduit Type Valves are API 6D licensed. They are suitable as line valves. Like Ball Valves they have DBB, FB, ASD, FSD, SLS, ESL features. They are suitable for pig transmission too. They can be used both for above ground and under ground applications.
It can be used as an isolating valve in pig loading-unloading platforms, in pump or compressor & in RMS stations, storage and distribution terminals.
SIL 2 & 3 certified. When required it can be manufactured from special material according to NACE corrosion standards and/or temperature class.
Through Conduit Slab Gate Valve - E50B

Through Conduit Slab Gate Valve - E50B

This type is designed and produced for pipelines. It should be preferred for On-Off services. Emergency Shutdown, Line Break and Remote Control types provide sound operation of the line. They are manufactured with a full bore section equals to pipeline cross section. Opening without decreasing the differential pressure is not recommended.
These Gate Valves are designed as pipeline valves and have piggible feature. Disc is designed as one-piece slab and the rings are float type.
Application Area
Pipeline
Pipeline
Storage
Well Head
Water Works
Power Plant
Functions
ESDV - LBV - SOV - BDV - SDV - MOV - MAN - Process Valve Systems

Download Product Catalogue

Vastas Figure
E50B
Type
Through Conduit Slab Gate Valve
NPS
2”-72”
DN
50-1800
Class
150-900#

Features

Bolted Bonnet (BB)
Outside Screwed & Yoke (OSY)
Rising Stem (RS)
Double Block & Bleed (DBB)
Anti Static Device (ASD)
Fire Safe Design (FSD)
Above Ground (AG) & Under Ground (UG)
Full Bore(FB)
Drain & Vent Connection
Injection Sealant (optional)

Standards

» Design API 6D, ISO 10434, ASME B16.34
» Face to Face size ASME B16.10
» End Type ASME B16.5 & B16.47 & ASME B16.25
» NACE MR0175, MR0103
» Fire safe valve design, according to API 607
and ISO 10497 standards.

Operators

» Manual Operated (Handwheel or Gearbox)
» Motor Operated
» Pneumatic Actuators
» Hydraulic Actuators
Through Conduit Double Expanding Gate Valve - E50D

Through Conduit Double Expanding Gate Valve - E50D

Cast Steel Type
This type is designed and produced for pipelines. It should be preferred for On-Off services. Emergency Shutdown, Line Break and Remote Control types provide sound operation of the line.
They are manufactured with a full bore section equals to pipeline cross section. Opening without decreasing the differential pressure is not recommended.
Disc is designed as two-pieces and may tighten in both open and closed position. It is possible to use these type Conduit Gate Valves with fixed rings.
Application Area
Pipeline
Pipeline
Storage
Well Head
Water Works
Power Plant
Functions
ESDV - LBV - SOV - BDV - SDV - MOV - MAN - Process Valve Systems

Download Product Catalogue

Vastas Figure
E50D
Type
Through Conduit Double Expanding Gate Valve
NPS
4”-36”
DN
100-900
Class
150-600#

Features

Bolted Bonnet (BB)
Outside Screwed & Yoke (OSY)
Rising Stem (RS)
Double Block & Bleed (DBB)
Anti Static Device (ASD)
Fire Safe Design (FSD)
Above Ground (AG) & Under Ground (UG)
Full Bore(FB)
Drain & Vent Connection
Injection Sealant (optional)

Standards

» Design API 6D, ISO 10434, ASME B16.34
» Face to Face size ASME B16.10
» End Type ASME B16.5 & B16.47 & ASME B16.25
» NACE MR0175, MR0103
» Fire safe valve design, according to API 6FA
and ISO 10497 standards.

Operators

» Manual Operated (Handwheel or Gearbox)
» Motor Operated (Rotork, Auma)
» Pneumatic Actuators
» Hydraulic Actuators
Through Conduit Gate Valve, Pressure Seal Bonnet Type - E50P

Through Conduit Gate Valve, Pressure Seal Bonnet Type - E50P

This gate valve is Through Conduit type with Pressure
Seal Bonnet and Weld End design.
Application Area
Pipeline
Pipeline
Storage
Water Works
Functions
ESDV - LBV - SOV - BDV - SDV - MOV - MAN - Process Valve Systems

Download Product Catalogue

Vastas Figure
E50P
Type
Through Conduit Gate Valve, Pressure Seal Bonnet Type
NPS
4”-24”
DN
100-600
Class
900-2500#

Features

Pressure Seal Bonnet
Outside Screwed & Yoke (OSY)
Rising Stem (RS)
Double Block & Bleed (DBB)
Anti Static Device (ASD)
Fire Safe Design (FSD)
Full Bore (FB)

Standards

» Design API 6D, ASME B16.34
» Butt Weld End (BW), End Type ASME B16.25

Operators

» Manual Operated (Handwheel or Gearbox)
» Motor Operated (Rotork, Auma)
» Pneumatic Actuators
» Hydraulic Actuators
API 6A Gate Valves - E50A

API 6A Gate Valves - E50A

This type is designed for wellhead and pipeline needs. It has conduit features. It can be used with hydraulic control and self-acting.
Application Area
Pipeline
Pipeline
Water Works
Functions
ESDV - LBV - SOV - BDV - SDV - MOV - MAN - Process Valve Systems

Download Product Catalogue

Vastas Figure
E50A
Type
Expanding or Slab Gate Valve
NPS
2”-13”
DN
50-350
Class
3000-5000-10000#

Features

Bolted Bonnet (BB)

Standards

» Design API 6A

Operators

» Manual Operated
» Pneumatic Actuators
» Hydraulic Actuators